Free crown SVG

Crown outline SVG

Crown outline, drawn as a line
Crown outline. The preview is the SVG file itself.

The classic five-point crown as a line about 2.5 mm wide, with a line across for the band and a solid ball on each point. For colouring pages, foil and engraving.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 63 mm (3.94 × 2.49 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length934 mm at this size
Narrowest part1.6 mm at this size
Nodes60 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,292 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.63 in (25 × 16 mm)0.41 mm237 mm140Too fine for most machines
2 × 1.26 in (51 × 32 mm)0.81 mm474 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.9 in (76 × 48 mm)1.2 mm712 mm15Vinyl, card and thin sheet
4 × 2.53 in (102 × 64 mm)1.6 mm949 mm8Vinyl, card and thin sheet
6 × 3.79 in (152 × 96 mm)2.4 mm1,423 mm3Vinyl, card and thin sheet
8 × 5.06 in (203 × 128 mm)3.3 mm1,898 mm2Any material, including 3 mm wood and acrylic
12 × 7.58 in (305 × 193 mm)4.9 mm2,847 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More crown SVG files

← Princess tiara with a heart All 15 crowns Layered crown in gold, red and pearl →