Free crown SVG

Crown icon with a base bar SVG

Crown icon with a base bar, as a solid black shape
Crown icon with a base bar. The preview is the SVG file itself.

The simplest sign for a crown: three straight points on a rounded base bar, with two windows between them. Made for small marks, stamps and badges.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 63 mm (3.94 × 2.46 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length475 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes27 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,279 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.63 in (25 × 16 mm)Over 1.5 mm121 mm140Vinyl, card and thin sheet
2 × 1.25 in (51 × 32 mm)Over 3 mm241 mm40Any material, including 3 mm wood and acrylic
3 × 1.87 in (76 × 48 mm)Over 4.6 mm362 mm15Any material, including 3 mm wood and acrylic
4 × 2.5 in (102 × 64 mm)Over 6.1 mm483 mm8Any material, including 3 mm wood and acrylic
6 × 3.75 in (152 × 95 mm)Over 9.1 mm724 mm3Any material, including 3 mm wood and acrylic
8 × 5 in (203 × 127 mm)Over 12 mm965 mm2Any material, including 3 mm wood and acrylic
12 × 7.5 in (305 × 190 mm)Over 18 mm1,448 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More crown SVG files

← Birthday crown strip with stars All 15 crowns Tiara with seven pointed loops →