Free car SVG

Stock car racecar SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Stock car racecar, as a solid black shape
Stock car racecar. The preview is the SVG file itself.

A stock car for the oval: a rear spoiler, a net across the driver’s window, two stripes on the wing and a big blank circle on the door, ready for a number.

What is in the file

Size100 × 38 mm (3.94 × 1.48 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut24: 1 outer edge and 23 cut-outs
Cut length683 mm at this size
Narrowest part1 mm at this size
Nodes178 curve and line segments

Measured from the file. PNG: 2,000 × 798 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.38 in (25 × 10 mm)0.25 mm173 mm210Too fine for most machines
2 × 0.75 in (51 × 19 mm)0.51 mm347 mm60Fine detail: vinyl and paper only, weed with care
3 × 1.13 in (76 × 29 mm)0.76 mm520 mm27Fine detail: vinyl and paper only, weed with care
4 × 1.5 in (102 × 38 mm)1 mm694 mm14Vinyl, card and thin sheet
6 × 2.25 in (152 × 57 mm)1.5 mm1,041 mm4Vinyl, card and thin sheet
8 × 3 in (203 × 76 mm)2 mm1,388 mm3Vinyl, card and thin sheet
12 × 4.5 in (305 × 114 mm)3 mm2,082 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More car SVG files

← Race car with open wheels All 17 cars Derby car with a roof sign →