Free car SVG

Lowrider car SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Lowrider car, as a solid black shape
Lowrider car. The preview is the SVG file itself.

A long, low cruiser sitting close to the ground on small wire wheels, with a tail fin, a covered rear wheel and a chrome line from nose to tail.

What is in the file

Size100 × 34 mm (3.94 × 1.32 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut19: 1 outer edge and 18 cut-outs
Cut length739 mm at this size
Narrowest part1 mm at this size
Nodes173 curve and line segments

Measured from the file. PNG: 2,000 × 723 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.34 in (25 × 9 mm)0.25 mm188 mm220Too fine for most machines
2 × 0.67 in (51 × 17 mm)0.51 mm375 mm65Fine detail: vinyl and paper only, weed with care
3 × 1.01 in (76 × 26 mm)0.76 mm563 mm30Fine detail: vinyl and paper only, weed with care
4 × 1.34 in (102 × 34 mm)1 mm751 mm14Vinyl, card and thin sheet
6 × 2.02 in (152 × 51 mm)1.5 mm1,126 mm5Vinyl, card and thin sheet
8 × 2.69 in (203 × 68 mm)2 mm1,502 mm4Vinyl, card and thin sheet
12 × 4.03 in (305 × 102 mm)3 mm2,252 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More car SVG files

← Convertible sports car All 17 cars Antique car with spoked wheels →