Free car SVG

Race car with open wheels SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Race car with open wheels, as a solid black shape
Race car with open wheels. The preview is the SVG file itself.

A single-seat racing car: a driver in a helmet, an air intake behind the head, a tall rear wing, a low front wing and a blank roundel on the nose for a number.

What is in the file

Size100 × 39 mm (3.94 × 1.55 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length524 mm at this size
Narrowest part1.7 mm at this size
Nodes146 curve and line segments

Measured from the file. PNG: 2,000 × 833 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.39 in (25 × 10 mm)0.43 mm133 mm200Too fine for most machines
2 × 0.79 in (51 × 20 mm)0.86 mm266 mm60Fine detail: vinyl and paper only, weed with care
3 × 1.18 in (76 × 30 mm)1.3 mm399 mm24Vinyl, card and thin sheet
4 × 1.57 in (102 × 40 mm)1.7 mm532 mm12Vinyl, card and thin sheet
6 × 2.36 in (152 × 60 mm)2.6 mm799 mm4Vinyl, card and thin sheet
8 × 3.14 in (203 × 80 mm)3.5 mm1,065 mm3Any material, including 3 mm wood and acrylic
12 × 4.72 in (305 × 120 mm)5.2 mm1,597 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More car SVG files

← Car icon from the front All 17 cars Stock car racecar →