Free car SVG

Derby car with a roof sign SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Derby car with a roof sign, as a solid black shape
Derby car with a roof sign. The preview is the SVG file itself.

A demolition derby car: buckled bonnet, bent bumper, cracks in the panels, two exhaust stacks puffing smoke, a blank sign on the roof and a blank panel on the door.

What is in the file

Size100 × 60 mm (3.94 × 2.38 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut21: 1 outer edge and 20 cut-outs
Cut length837 mm at this size
Narrowest part1.5 mm at this size
Nodes260 curve and line segments

Measured from the file. PNG: 2,000 × 1,238 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.6 in (25 × 15 mm)0.38 mm213 mm150Too fine for most machines
2 × 1.21 in (51 × 31 mm)0.76 mm425 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.81 in (76 × 46 mm)1.1 mm638 mm18Vinyl, card and thin sheet
4 × 2.42 in (102 × 61 mm)1.5 mm850 mm8Vinyl, card and thin sheet
6 × 3.62 in (152 × 92 mm)2.3 mm1,276 mm3Vinyl, card and thin sheet
8 × 4.83 in (203 × 123 mm)3 mm1,701 mm2Any material, including 3 mm wood and acrylic
12 × 7.25 in (305 × 184 mm)4.6 mm2,551 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More car SVG files

← Stock car racecar All 17 cars Muscle car with a bonnet scoop →