Free Boss Babe SVG

Boss Babe in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Boss Babe in Pacifico, as a solid black shape
Boss Babe in Pacifico. The preview is the SVG file itself.

“Boss Babe” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size88 × 100 mm (3.48 × 3.94 in), scales to any size
Pieces5 separate pieces
Outlines to cut10: 5 outer edges and 5 cut-outs
Cut length1,035 mm at this size
Narrowest part2.4 mm at this size
Nodes246 curve and line segments

Measured from the file. PNG: 1,775 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.88 × 1 in (22 × 25 mm)0.61 mm263 mm110Fine detail: vinyl and paper only, weed with care
1.77 × 2 in (45 × 51 mm)1.2 mm526 mm30Vinyl, card and thin sheet
2.65 × 3 in (67 × 76 mm)1.8 mm789 mm12Vinyl, card and thin sheet
3.53 × 4 in (90 × 102 mm)2.4 mm1,052 mm6Vinyl, card and thin sheet
5.3 × 6 in (135 × 152 mm)3.7 mm1,577 mm2Any material, including 3 mm wood and acrylic
7.06 × 8 in (179 × 203 mm)4.9 mm2,103 mm1Any material, including 3 mm wood and acrylic
10.6 × 12 in (269 × 305 mm)7.3 mm3,155 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Boss Babe SVG files

← Boss Babe with a crown All 13 Boss Babe designs Boss Babe in Lobster →