Free Boss Babe SVG

Boss Babe in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Boss Babe in Amatic SC, as a solid black shape
Boss Babe in Amatic SC. The preview is the SVG file itself.

“Boss Babe” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size59 × 100 mm (2.33 × 3.94 in), scales to any size
Pieces8 separate pieces
Outlines to cut16: 8 outer edges and 8 cut-outs
Cut length1,119 mm at this size
Narrowest part2.4 mm at this size
Nodes282 curve and line segments

Measured from the file. PNG: 1,213 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.59 × 1 in (15 × 25 mm)0.61 mm284 mm150Fine detail: vinyl and paper only, weed with care
1.18 × 2 in (30 × 51 mm)1.2 mm568 mm40Vinyl, card and thin sheet
1.77 × 3 in (45 × 76 mm)1.8 mm853 mm18Vinyl, card and thin sheet
2.36 × 4 in (60 × 102 mm)2.4 mm1,137 mm8Vinyl, card and thin sheet
3.55 × 6 in (90 × 152 mm)3.7 mm1,705 mm3Any material, including 3 mm wood and acrylic
4.73 × 8 in (120 × 203 mm)4.9 mm2,274 mm2Any material, including 3 mm wood and acrylic
7.09 × 12 in (180 × 305 mm)7.3 mm3,411 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Boss Babe SVG files

← Boss Babe in Alfa Slab One All 13 Boss Babe designs Boss Babe in block capitals →