Free Boss Babe SVG

Boss Babe outline lettering SVG

Boss Babe outline lettering, drawn as a line — Boss Babe outline lettering. The preview is the SVG file itself.

“Boss Babe” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 85 mm (3.94 × 3.35 in), scales to any size
Pieces	16 separate pieces
Outlines to cut	32: 16 outer edges and 16 cut-outs
Cut length	1,832 mm at this size
Narrowest part	1.4 mm at this size
Nodes	388 curve and line segments

Measured from the file. PNG: 2,000 × 1,712 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.85 in (25 × 22 mm)	0.36 mm	465 mm	110	Too fine for most machines
2 × 1.7 in (51 × 43 mm)	0.71 mm	931 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.55 in (76 × 65 mm)	1.1 mm	1,396 mm	12	Vinyl, card and thin sheet
4 × 3.4 in (102 × 86 mm)	1.4 mm	1,861 mm	6	Vinyl, card and thin sheet
6 × 5.1 in (152 × 130 mm)	2.1 mm	2,792 mm	2	Vinyl, card and thin sheet
8 × 6.8 in (203 × 173 mm)	2.8 mm	3,723 mm	1	Vinyl, card and thin sheet
12 × 10.2 in (305 × 259 mm)	4.3 mm	5,584 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Boss Babe SVG files

← Boss Babe with stars All 12 Boss Babe designs Boss Babe stencil plate →