Free Boss Babe SVG

Boss Babe in Kaushan Script SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Boss Babe in Kaushan Script, as a solid black shape
Boss Babe in Kaushan Script. The preview is the SVG file itself.

“Boss Babe” set in Kaushan Script, a lively brush script, on 2 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.

What is in the file

Size100 × 99 mm (3.94 × 3.91 in), scales to any size
Pieces8 separate pieces
Outlines to cut16: 8 outer edges and 8 cut-outs
Cut length1,339 mm at this size
Narrowest part1.6 mm at this size
Nodes322 curve and line segments

Measured from the file. PNG: 2,000 × 1,985 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.99 in (25 × 25 mm)0.41 mm340 mm100Too fine for most machines
2 × 1.98 in (51 × 50 mm)0.81 mm680 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.98 in (76 × 76 mm)1.2 mm1,020 mm9Vinyl, card and thin sheet
4 × 3.97 in (102 × 101 mm)1.6 mm1,360 mm4Vinyl, card and thin sheet
6 × 5.95 in (152 × 151 mm)2.4 mm2,041 mm1Vinyl, card and thin sheet
8 × 7.94 in (203 × 202 mm)3.3 mm2,721 mm1Any material, including 3 mm wood and acrylic
12 × 11.9 in (305 × 302 mm)4.9 mm4,081 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Boss Babe SVG files

← Boss Babe in Lobster All 13 Boss Babe designs Boss Babe in Lilita One →