Free Boss Babe SVG

Boss Babe in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Boss Babe in Lilita One, as a solid black shape
Boss Babe in Lilita One. The preview is the SVG file itself.

“Boss Babe” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 88 mm (3.94 × 3.47 in), scales to any size
Pieces8 separate pieces
Outlines to cut16: 8 outer edges and 8 cut-outs
Cut length972 mm at this size
Narrowest part5.1 mm at this size
Nodes189 curve and line segments

Measured from the file. PNG: 2,000 × 1,773 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.88 in (25 × 22 mm)1.3 mm247 mm110Vinyl, card and thin sheet
2 × 1.76 in (51 × 45 mm)2.6 mm494 mm30Vinyl, card and thin sheet
3 × 2.65 in (76 × 67 mm)3.9 mm741 mm12Any material, including 3 mm wood and acrylic
4 × 3.53 in (102 × 90 mm)5.2 mm988 mm6Any material, including 3 mm wood and acrylic
6 × 5.29 in (152 × 134 mm)7.8 mm1,481 mm2Any material, including 3 mm wood and acrylic
8 × 7.06 in (203 × 179 mm)10 mm1,975 mm1Any material, including 3 mm wood and acrylic
12 × 10.58 in (305 × 269 mm)16 mm2,963 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Boss Babe SVG files

← Boss Babe in Kaushan Script All 13 Boss Babe designs Boss Babe in Alfa Slab One →