Free Boss Babe SVG

Boss Babe with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Boss Babe with stars, as a solid black shape
Boss Babe with stars. The preview is the SVG file itself.

“Boss Babe” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size70 × 100 mm (2.74 × 3.94 in), scales to any size
Pieces11 separate pieces
Outlines to cut17: 11 outer edges and 6 cut-outs
Cut length1,057 mm at this size
Narrowest part1.3 mm at this size
Nodes275 curve and line segments

Measured from the file. PNG: 1,415 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.7 × 1 in (18 × 25 mm)0.33 mm268 mm130Too fine for most machines
1.39 × 2 in (35 × 51 mm)0.66 mm537 mm35Fine detail: vinyl and paper only, weed with care
2.09 × 3 in (53 × 76 mm)0.99 mm805 mm15Fine detail: vinyl and paper only, weed with care
2.78 × 4 in (71 × 102 mm)1.3 mm1,074 mm8Vinyl, card and thin sheet
4.18 × 6 in (106 × 152 mm)2 mm1,611 mm2Vinyl, card and thin sheet
5.57 × 8 in (141 × 203 mm)2.6 mm2,148 mm2Vinyl, card and thin sheet
8.35 × 12 in (212 × 305 mm)4 mm3,222 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Boss Babe SVG files

← Boss Babe in script and capitals All 13 Boss Babe designs Boss Babe outline lettering →