Free Birthday Boy SVG

Birthday Boy in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Birthday Boy in Lilita One, as a solid black shape
Birthday Boy in Lilita One. The preview is the SVG file itself.

“Birthday Boy” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 54 mm (3.94 × 2.12 in), scales to any size
Pieces12 separate pieces
Outlines to cut19: 12 outer edges and 7 cut-outs
Cut length727 mm at this size
Narrowest part2.8 mm at this size
Nodes205 curve and line segments

Measured from the file. PNG: 2,000 × 1,112 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.54 in (25 × 14 mm)0.71 mm185 mm160Fine detail: vinyl and paper only, weed with care
2 × 1.08 in (51 × 27 mm)1.4 mm369 mm45Vinyl, card and thin sheet
3 × 1.61 in (76 × 41 mm)2.1 mm554 mm18Vinyl, card and thin sheet
4 × 2.15 in (102 × 55 mm)2.8 mm739 mm10Vinyl, card and thin sheet
6 × 3.23 in (152 × 82 mm)4.3 mm1,108 mm3Any material, including 3 mm wood and acrylic
8 × 4.3 in (203 × 109 mm)5.7 mm1,477 mm2Any material, including 3 mm wood and acrylic
12 × 6.46 in (305 × 164 mm)8.5 mm2,216 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Birthday Boy SVG files

← Birthday Boy in Kaushan Script All 13 Birthday Boy designs Birthday Boy in Alfa Slab One →