Free Birthday Boy SVG

Birthday Boy with stars SVG

Birthday Boy with stars, as a solid black shape — Birthday Boy with stars. The preview is the SVG file itself.

“Birthday Boy” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 99 mm (3.94 × 3.9 in), scales to any size
Pieces	12 separate pieces
Outlines to cut	17: 12 outer edges and 5 cut-outs
Cut length	1,191 mm at this size
Narrowest part	1.2 mm at this size
Nodes	457 curve and line segments

Measured from the file. PNG: 2,000 × 1,983 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.99 in (25 × 25 mm)	0.3 mm	303 mm	100	Too fine for most machines
2 × 1.98 in (51 × 50 mm)	0.61 mm	605 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 2.97 in (76 × 76 mm)	0.91 mm	908 mm	9	Fine detail: vinyl and paper only, weed with care
4 × 3.96 in (102 × 101 mm)	1.2 mm	1,210 mm	4	Vinyl, card and thin sheet
6 × 5.95 in (152 × 151 mm)	1.8 mm	1,815 mm	1	Vinyl, card and thin sheet
8 × 7.93 in (203 × 201 mm)	2.4 mm	2,420 mm	1	Vinyl, card and thin sheet
12 × 11.89 in (305 × 302 mm)	3.7 mm	3,630 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Birthday Boy SVG files

← Birthday Boy in script and capitals All 12 Birthday Boy designs Birthday Boy outline lettering →