Free Birthday Boy SVG

Birthday Boy in script and capitals SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Birthday Boy in script and capitals, as a solid black shape
Birthday Boy in script and capitals. The preview is the SVG file itself.

“Birthday” in Pacifico script over “BOY” in narrow capitals, the two lines made the same width. Mixing a script with capitals is the classic sign-painter’s pairing.

What is in the file

Size95 × 100 mm (3.72 × 3.94 in), scales to any size
Pieces6 separate pieces
Outlines to cut15: 6 outer edges and 9 cut-outs
Cut length1,390 mm at this size
Narrowest part1.5 mm at this size
Nodes274 curve and line segments

Measured from the file. PNG: 1,894 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.95 × 1 in (24 × 25 mm)0.38 mm353 mm100Too fine for most machines
1.89 × 2 in (48 × 51 mm)0.76 mm706 mm25Fine detail: vinyl and paper only, weed with care
2.83 × 3 in (72 × 76 mm)1.1 mm1,059 mm12Vinyl, card and thin sheet
3.78 × 4 in (96 × 102 mm)1.5 mm1,412 mm6Vinyl, card and thin sheet
5.67 × 6 in (144 × 152 mm)2.3 mm2,118 mm2Vinyl, card and thin sheet
7.56 × 8 in (192 × 203 mm)3 mm2,824 mm1Any material, including 3 mm wood and acrylic
11.34 × 12 in (288 × 305 mm)4.6 mm4,237 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Birthday Boy SVG files

← Birthday Boy in block capitals All 13 Birthday Boy designs Birthday Boy with stars →