Free Birthday Boy SVG

Birthday Boy stencil plate SVG

Birthday Boy stencil plate, as a solid black shape — Birthday Boy stencil plate. The preview is the SVG file itself.

A rounded plate with “BIRTHDAY BOY” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 86 mm (3.94 × 3.38 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	12: 1 outer edge and 11 cut-outs
Cut length	1,467 mm at this size
Narrowest part	0.9 mm at this size
Nodes	179 curve and line segments

Measured from the file. PNG: 2,000 × 1,729 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.86 in (25 × 22 mm)	0.23 mm	373 mm	110	Too fine for most machines
2 × 1.72 in (51 × 44 mm)	0.46 mm	745 mm	30	Too fine for most machines
3 × 2.58 in (76 × 65 mm)	0.69 mm	1,118 mm	12	Fine detail: vinyl and paper only, weed with care
4 × 3.44 in (102 × 87 mm)	0.91 mm	1,490 mm	6	Fine detail: vinyl and paper only, weed with care
6 × 5.15 in (152 × 131 mm)	1.4 mm	2,236 mm	2	Vinyl, card and thin sheet
8 × 6.87 in (203 × 175 mm)	1.8 mm	2,981 mm	1	Vinyl, card and thin sheet
12 × 10.31 in (305 × 262 mm)	2.7 mm	4,471 mm	1	Vinyl, card and thin sheet

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Birthday Boy SVG files

← Birthday Boy outline lettering All 12 Birthday Boy designs Birthday Boy with a drop shadow →