Free Birthday Boy SVG

Birthday Boy in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Birthday Boy in Amatic SC, as a solid black shape
Birthday Boy in Amatic SC. The preview is the SVG file itself.

“Birthday Boy” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 84 mm (3.94 × 3.32 in), scales to any size
Pieces11 separate pieces
Outlines to cut19: 11 outer edges and 8 cut-outs
Cut length1,294 mm at this size
Narrowest part1.3 mm at this size
Nodes375 curve and line segments

Measured from the file. PNG: 2,000 × 1,698 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.84 in (25 × 21 mm)0.33 mm329 mm110Too fine for most machines
2 × 1.69 in (51 × 43 mm)0.66 mm657 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.53 in (76 × 64 mm)0.99 mm986 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.37 in (102 × 86 mm)1.3 mm1,315 mm6Vinyl, card and thin sheet
6 × 5.06 in (152 × 128 mm)2 mm1,972 mm2Vinyl, card and thin sheet
8 × 6.74 in (203 × 171 mm)2.6 mm2,629 mm1Vinyl, card and thin sheet
12 × 10.12 in (305 × 257 mm)4 mm3,944 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Birthday Boy SVG files

← Birthday Boy in Alfa Slab One All 13 Birthday Boy designs Birthday Boy in block capitals →