Free Beach Please SVG

Beach Please stencil plate SVG

Beach Please stencil plate, as a solid black shape — Beach Please stencil plate. The preview is the SVG file itself.

A rounded plate with “BEACH PLEASE” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 73 mm (3.94 × 2.88 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	12: 1 outer edge and 11 cut-outs
Cut length	1,422 mm at this size
Narrowest part	1.2 mm at this size
Nodes	180 curve and line segments

Measured from the file. PNG: 2,000 × 1,483 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.73 in (25 × 19 mm)	0.3 mm	361 mm	130	Too fine for most machines
2 × 1.46 in (51 × 37 mm)	0.61 mm	722 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.19 in (76 × 56 mm)	0.91 mm	1,084 mm	15	Fine detail: vinyl and paper only, weed with care
4 × 2.92 in (102 × 74 mm)	1.2 mm	1,445 mm	6	Vinyl, card and thin sheet
6 × 4.39 in (152 × 111 mm)	1.8 mm	2,167 mm	2	Vinyl, card and thin sheet
8 × 5.85 in (203 × 149 mm)	2.4 mm	2,890 mm	2	Vinyl, card and thin sheet
12 × 8.77 in (305 × 223 mm)	3.7 mm	4,334 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Beach Please SVG files

← Beach Please outline lettering All 12 Beach Please designs Beach Please with a drop shadow →