Free Beach Please SVG

Beach Please with a drop shadow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Beach Please with a drop shadow, in layered colours
Beach Please with a drop shadow. The preview is the SVG file itself.

“Beach Please” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

What is in the file

Size100 × 94 mm (3.94 × 3.7 in), scales to any size
Pieces6 separate pieces
Outlines to cut28: 6 outer edges and 22 cut-outs
Cut length2,055 mm at this size
Narrowest part4.6 mm at this size
Nodes497 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 2,000 × 1,887 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.94 in (25 × 24 mm)1.2 mm522 mm100Vinyl, card and thin sheet
2 × 1.88 in (51 × 48 mm)2.3 mm1,044 mm25Vinyl, card and thin sheet
3 × 2.82 in (76 × 72 mm)3.5 mm1,566 mm12Any material, including 3 mm wood and acrylic
4 × 3.76 in (102 × 96 mm)4.7 mm2,088 mm6Any material, including 3 mm wood and acrylic
6 × 5.65 in (152 × 143 mm)7 mm3,132 mm2Any material, including 3 mm wood and acrylic
8 × 7.53 in (203 × 191 mm)9.3 mm4,176 mm1Any material, including 3 mm wood and acrylic
12 × 11.29 in (305 × 287 mm)14 mm6,264 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Beach Please SVG files

← Beach Please stencil plate All 13 Beach Please designs Beach Please with a palm tree →