Beach Please in Kaushan Script SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Beach Please” set in Kaushan Script, a lively brush script, on 2 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.
What is in the file
| Size | 100 × 84 mm (3.94 × 3.31 in), scales to any size |
|---|---|
| Pieces | 11 separate pieces |
| Outlines to cut | 18: 11 outer edges and 7 cut-outs |
| Cut length | 1,298 mm at this size |
| Narrowest part | 1.5 mm at this size |
| Nodes | 373 curve and line segments |
Measured from the file. PNG: 2,000 × 1,692 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.84 in (25 × 21 mm) | 0.38 mm | 330 mm | 110 | Too fine for most machines |
| 2 × 1.68 in (51 × 43 mm) | 0.76 mm | 659 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.52 in (76 × 64 mm) | 1.1 mm | 989 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.36 in (102 × 85 mm) | 1.5 mm | 1,319 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.04 in (152 × 128 mm) | 2.3 mm | 1,978 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.72 in (203 × 171 mm) | 3 mm | 2,638 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.08 in (305 × 256 mm) | 4.6 mm | 3,956 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Beach Please SVG files
-
Beach Please in Lilita One Solid · 11 pieces
-
Beach Please in Alfa Slab One Solid · 11 pieces
-
Beach Please in Amatic SC Solid · 11 pieces
-
Beach Please in block capitals Solid · 11 pieces
-
Beach Please in script and capitals Solid · 8 pieces
-
Beach Please with stars Solid · 10 pieces
-
Beach Please outline lettering Outline · 19 pieces
-
Beach Please stencil plate Solid · one piece
← Beach Please in Lobster All 13 Beach Please designs Beach Please in Lilita One →