Beach Please in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Beach Please” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 67 mm (3.94 × 2.62 in), scales to any size |
|---|---|
| Pieces | 11 separate pieces |
| Outlines to cut | 19: 11 outer edges and 8 cut-outs |
| Cut length | 953 mm at this size |
| Narrowest part | 3.8 mm at this size |
| Nodes | 243 curve and line segments |
Measured from the file. PNG: 2,000 × 1,356 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.67 in (25 × 17 mm) | 0.97 mm | 242 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.33 in (51 × 34 mm) | 1.9 mm | 484 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2 in (76 × 51 mm) | 2.9 mm | 726 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.66 in (102 × 68 mm) | 3.9 mm | 968 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 3.99 in (152 × 101 mm) | 5.8 mm | 1,452 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.32 in (203 × 135 mm) | 7.7 mm | 1,936 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.98 in (305 × 203 mm) | 12 mm | 2,905 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Beach Please SVG files
-
Beach Please in Alfa Slab One Solid · 11 pieces
-
Beach Please in Amatic SC Solid · 11 pieces
-
Beach Please in block capitals Solid · 11 pieces
-
Beach Please in script and capitals Solid · 8 pieces
-
Beach Please with stars Solid · 10 pieces
-
Beach Please outline lettering Outline · 19 pieces
-
Beach Please stencil plate Solid · one piece
-
Beach Please with a drop shadow Layered · 6 pieces
← Beach Please in Kaushan Script All 13 Beach Please designs Beach Please in Alfa Slab One →