Beach Please in Amatic SC SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Beach Please” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.
What is in the file
| Size | 85 × 100 mm (3.33 × 3.94 in), scales to any size |
|---|---|
| Pieces | 11 separate pieces |
| Outlines to cut | 16: 11 outer edges and 5 cut-outs |
| Cut length | 1,379 mm at this size |
| Narrowest part | 1.5 mm at this size |
| Nodes | 384 curve and line segments |
Measured from the file. PNG: 1,706 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.85 × 1 in (22 × 25 mm) | 0.38 mm | 350 mm | 110 | Too fine for most machines |
| 1.69 × 2 in (43 × 51 mm) | 0.76 mm | 701 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 2.54 × 3 in (65 × 76 mm) | 1.1 mm | 1,051 mm | 12 | Vinyl, card and thin sheet |
| 3.39 × 4 in (86 × 102 mm) | 1.5 mm | 1,401 mm | 6 | Vinyl, card and thin sheet |
| 5.08 × 6 in (129 × 152 mm) | 2.3 mm | 2,102 mm | 2 | Vinyl, card and thin sheet |
| 6.78 × 8 in (172 × 203 mm) | 3 mm | 2,802 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.16 × 12 in (258 × 305 mm) | 4.6 mm | 4,203 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Beach Please SVG files
-
Beach Please in block capitals Solid · 11 pieces
-
Beach Please in script and capitals Solid · 8 pieces
-
Beach Please with stars Solid · 10 pieces
-
Beach Please outline lettering Outline · 19 pieces
-
Beach Please stencil plate Solid · one piece
-
Beach Please with a drop shadow Layered · 6 pieces
-
Beach Please with a palm tree Solid · 9 pieces
-
Beach Please in Pacifico Solid · 4 pieces
← Beach Please in Alfa Slab One All 13 Beach Please designs Beach Please in block capitals →