Free Be Kind SVG

Be Kind stencil plate SVG

Be Kind stencil plate, as a solid black shape — Be Kind stencil plate. The preview is the SVG file itself.

A rounded plate with “BE KIND” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	75 × 100 mm (2.96 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	7: 1 outer edge and 6 cut-outs
Cut length	1,291 mm at this size
Narrowest part	1.3 mm at this size
Nodes	94 curve and line segments

Measured from the file. PNG: 1,523 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.75 × 1 in (19 × 25 mm)	0.33 mm	328 mm	120	Too fine for most machines
1.5 × 2 in (38 × 51 mm)	0.66 mm	656 mm	35	Fine detail: vinyl and paper only, weed with care
2.26 × 3 in (57 × 76 mm)	0.99 mm	984 mm	12	Fine detail: vinyl and paper only, weed with care
3.01 × 4 in (76 × 102 mm)	1.3 mm	1,312 mm	6	Vinyl, card and thin sheet
4.51 × 6 in (115 × 152 mm)	2 mm	1,967 mm	2	Vinyl, card and thin sheet
6.02 × 8 in (153 × 203 mm)	2.6 mm	2,623 mm	1	Vinyl, card and thin sheet
9.02 × 12 in (229 × 305 mm)	4 mm	3,935 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Be Kind SVG files

← Be Kind outline lettering All 12 Be Kind designs Be Kind with a drop shadow →