Free Be Kind SVG

Be Kind in Kaushan Script SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Be Kind in Kaushan Script, as a solid black shape
Be Kind in Kaushan Script. The preview is the SVG file itself.

“Be Kind” set in Kaushan Script, a lively brush script, on 2 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.

What is in the file

Size93 × 100 mm (3.66 × 3.94 in), scales to any size
Pieces8 separate pieces
Outlines to cut12: 8 outer edges and 4 cut-outs
Cut length996 mm at this size
Narrowest part1.8 mm at this size
Nodes243 curve and line segments

Measured from the file. PNG: 1,865 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.93 × 1 in (24 × 25 mm)0.46 mm253 mm100Too fine for most machines
1.86 × 2 in (47 × 51 mm)0.91 mm506 mm25Fine detail: vinyl and paper only, weed with care
2.79 × 3 in (71 × 76 mm)1.4 mm759 mm12Vinyl, card and thin sheet
3.72 × 4 in (94 × 102 mm)1.8 mm1,012 mm6Vinyl, card and thin sheet
5.58 × 6 in (142 × 152 mm)2.7 mm1,518 mm2Vinyl, card and thin sheet
7.44 × 8 in (189 × 203 mm)3.7 mm2,024 mm1Any material, including 3 mm wood and acrylic
11.16 × 12 in (283 × 305 mm)5.5 mm3,036 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Be Kind SVG files

← Be Kind in Lobster All 13 Be Kind designs Be Kind in Lilita One →