Free Be Kind SVG

Be Kind outline lettering SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Be Kind outline lettering, drawn as a line
Be Kind outline lettering. The preview is the SVG file itself.

“Be Kind” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

What is in the file

Size100 × 89 mm (3.94 × 3.5 in), scales to any size
Pieces11 separate pieces
Outlines to cut22: 11 outer edges and 11 cut-outs
Cut length1,515 mm at this size
Narrowest part1.7 mm at this size
Nodes316 curve and line segments

Measured from the file. PNG: 2,000 × 1,788 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.89 in (25 × 23 mm)0.43 mm385 mm110Too fine for most machines
2 × 1.78 in (51 × 45 mm)0.86 mm770 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.67 in (76 × 68 mm)1.3 mm1,154 mm12Vinyl, card and thin sheet
4 × 3.56 in (102 × 90 mm)1.7 mm1,539 mm6Vinyl, card and thin sheet
6 × 5.34 in (152 × 136 mm)2.6 mm2,309 mm2Vinyl, card and thin sheet
8 × 7.12 in (203 × 181 mm)3.5 mm3,078 mm1Any material, including 3 mm wood and acrylic
12 × 10.68 in (305 × 271 mm)5.2 mm4,618 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Be Kind SVG files

← Be Kind with hearts All 13 Be Kind designs Be Kind stencil plate →