Free Be Kind SVG

Be Kind in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Be Kind in Alfa Slab One, as a solid black shape
Be Kind in Alfa Slab One. The preview is the SVG file itself.

“Be Kind” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 80 mm (3.94 × 3.15 in), scales to any size
Pieces7 separate pieces
Outlines to cut11: 7 outer edges and 4 cut-outs
Cut length856 mm at this size
Narrowest part4.2 mm at this size
Nodes148 curve and line segments

Measured from the file. PNG: 2,000 × 1,613 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.8 in (25 × 20 mm)1.1 mm217 mm120Vinyl, card and thin sheet
2 × 1.6 in (51 × 41 mm)2.1 mm435 mm30Vinyl, card and thin sheet
3 × 2.4 in (76 × 61 mm)3.2 mm652 mm12Any material, including 3 mm wood and acrylic
4 × 3.2 in (102 × 81 mm)4.3 mm870 mm6Any material, including 3 mm wood and acrylic
6 × 4.79 in (152 × 122 mm)6.4 mm1,305 mm2Any material, including 3 mm wood and acrylic
8 × 6.39 in (203 × 162 mm)8.5 mm1,739 mm1Any material, including 3 mm wood and acrylic
12 × 9.59 in (305 × 244 mm)13 mm2,609 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Be Kind SVG files

← Be Kind in Lilita One All 13 Be Kind designs Be Kind in Amatic SC →