Free Be Kind SVG

Be Kind in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Be Kind in Lilita One, as a solid black shape
Be Kind in Lilita One. The preview is the SVG file itself.

“Be Kind” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 93 mm (3.94 × 3.65 in), scales to any size
Pieces7 separate pieces
Outlines to cut11: 7 outer edges and 4 cut-outs
Cut length826 mm at this size
Narrowest part5.7 mm at this size
Nodes171 curve and line segments

Measured from the file. PNG: 2,000 × 1,860 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.93 in (25 × 24 mm)1.4 mm210 mm100Vinyl, card and thin sheet
2 × 1.85 in (51 × 47 mm)2.9 mm420 mm25Vinyl, card and thin sheet
3 × 2.78 in (76 × 71 mm)4.3 mm629 mm12Any material, including 3 mm wood and acrylic
4 × 3.71 in (102 × 94 mm)5.8 mm839 mm6Any material, including 3 mm wood and acrylic
6 × 5.56 in (152 × 141 mm)8.7 mm1,259 mm2Any material, including 3 mm wood and acrylic
8 × 7.42 in (203 × 188 mm)12 mm1,678 mm1Any material, including 3 mm wood and acrylic
12 × 11.12 in (305 × 283 mm)17 mm2,518 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Be Kind SVG files

← Be Kind in Kaushan Script All 13 Be Kind designs Be Kind in Alfa Slab One →