Free baby feet SVG

Baby feet ornament SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Baby feet ornament, as a solid black shape
Baby feet ornament. The preview is the SVG file itself.

A round bauble with a cap and a hanging loop, and a pair of footprints cut out of the middle. One piece, for a first Christmas tree in wood, acrylic or card.

What is in the file

Size85 × 100 mm (3.33 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length689 mm at this size
Narrowest part1 mm at this size
Nodes147 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,702 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.85 × 1 in (21 × 25 mm)0.25 mm175 mm110Too fine for most machines
1.69 × 2 in (43 × 51 mm)0.51 mm350 mm30Fine detail: vinyl and paper only, weed with care
2.54 × 3 in (64 × 76 mm)0.76 mm525 mm12Fine detail: vinyl and paper only, weed with care
3.38 × 4 in (86 × 102 mm)1 mm700 mm6Vinyl, card and thin sheet
5.07 × 6 in (129 × 152 mm)1.5 mm1,050 mm2Vinyl, card and thin sheet
6.76 × 8 in (172 × 203 mm)2 mm1,400 mm1Vinyl, card and thin sheet
10.14 × 12 in (258 × 305 mm)3 mm2,100 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More baby feet SVG files

← Baby feet with wings All 13 baby feet Trail of baby footprints →