Free baby feet SVG

Baby feet footprints SVG

Baby feet footprints, as a solid black shape
Baby feet footprints. The preview is the SVG file itself.

A left and a right footprint side by side, each a chubby sole with five separate toes, as an ink print would leave them. Twelve loose pieces by design: move them together on transfer tape.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 91 mm (3.94 × 3.59 in), scales to any size
Pieces12 separate pieces
Outlines to cut12 outlines
Cut length656 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes111 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,829 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.91 in (25 × 23 mm)Over 1.5 mm167 mm100Vinyl, card and thin sheet
2 × 1.82 in (51 × 46 mm)Over 3 mm333 mm30Any material, including 3 mm wood and acrylic
3 × 2.73 in (76 × 69 mm)Over 4.6 mm500 mm12Any material, including 3 mm wood and acrylic
4 × 3.64 in (102 × 93 mm)Over 6.1 mm666 mm6Any material, including 3 mm wood and acrylic
6 × 5.47 in (152 × 139 mm)Over 9.1 mm1,000 mm2Any material, including 3 mm wood and acrylic
8 × 7.29 in (203 × 185 mm)Over 12 mm1,333 mm1Any material, including 3 mm wood and acrylic
12 × 10.93 in (305 × 278 mm)Over 18 mm1,999 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More baby feet SVG files

← Layered baby feet on a circle All 13 baby feet Single baby footprint →