Free baby feet SVG

Baby feet silhouette SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Baby feet silhouette, as a solid black shape
Baby feet silhouette. The preview is the SVG file itself.

Both feet as solid shapes, with the toes joined to the soles so each foot cuts as a single piece. Two pieces, quick to weed, and clear down to 30 mm.

What is in the file

Size100 × 92 mm (3.94 × 3.63 in), scales to any size
Pieces2 separate pieces
Outlines to cut4: 2 outer edges and 2 cut-outs
Cut length590 mm at this size
Narrowest part2.2 mm at this size
Nodes206 curve and line segments
SymmetryMirror
Also found asBaby foot print SVG

Measured from the file. PNG: 2,000 × 1,850 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.92 in (25 × 23 mm)0.56 mm150 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.84 in (51 × 47 mm)1.1 mm300 mm25Vinyl, card and thin sheet
3 × 2.77 in (76 × 70 mm)1.7 mm450 mm12Vinyl, card and thin sheet
4 × 3.69 in (102 × 94 mm)2.2 mm599 mm6Vinyl, card and thin sheet
6 × 5.53 in (152 × 141 mm)3.4 mm899 mm2Any material, including 3 mm wood and acrylic
8 × 7.38 in (203 × 187 mm)4.5 mm1,199 mm1Any material, including 3 mm wood and acrylic
12 × 11.06 in (305 × 281 mm)6.7 mm1,798 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More baby feet SVG files

← Single baby footprint All 13 baby feet Baby feet outline →