Free baby feet SVG

Baby feet with a name banner SVG

Baby feet with a name banner. The preview is the SVG file itself.

A pair of footprints above a blank ribbon banner with forked ends. Add a name or a date of birth to the banner in your own software. The prints and the banner are separate pieces.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	96 × 100 mm (3.77 × 3.94 in), scales to any size
Pieces	13 separate pieces
Outlines to cut	13 outlines
Cut length	705 mm at this size
Narrowest part	4.3 mm at this size
Nodes	121 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,919 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.96 × 1 in (24 × 25 mm)	1.1 mm	179 mm	100	Vinyl, card and thin sheet
1.92 × 2 in (49 × 51 mm)	2.2 mm	358 mm	25	Vinyl, card and thin sheet
2.87 × 3 in (73 × 76 mm)	3.3 mm	537 mm	9	Any material, including 3 mm wood and acrylic
3.83 × 4 in (97 × 102 mm)	4.4 mm	716 mm	6	Any material, including 3 mm wood and acrylic
5.75 × 6 in (146 × 152 mm)	6.6 mm	1,074 mm	2	Any material, including 3 mm wood and acrylic
7.66 × 8 in (195 × 203 mm)	8.7 mm	1,433 mm	1	Any material, including 3 mm wood and acrylic
11.5 × 12 in (292 × 305 mm)	13 mm	2,149 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More baby feet SVG files

← Baby feet taking a step All 13 baby feet Layered baby feet on a circle →