Stacked pair of 3D teacups SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Two cups and two flat saucers for a tea party tower. The upper saucer is 84 mm across, wider than the lower cup’s 74 mm rim, so it rests on the rim and the small cup stands on it. Cut 280 mm tall, on a 12 inch mat, the tower is about 80 mm tall. Loose pieces.
What is in the file
| Size | 77 × 100 mm (3.02 × 3.94 in), scales to any size |
|---|---|
| Pieces | 10 separate pieces |
| Outlines to cut | 27: 10 outer edges and 17 cut-outs |
| Cut length | 929 mm at this size |
| Narrowest part | 1.2 mm at this size |
| Nodes | 238 curve and line segments |
Measured from the file. PNG: 1,552 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.77 × 1 in (19 × 25 mm) | 0.3 mm | 236 mm | 120 | Too fine for most machines |
| 1.53 × 2 in (39 × 51 mm) | 0.61 mm | 472 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 2.3 × 3 in (58 × 76 mm) | 0.91 mm | 708 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 3.07 × 4 in (78 × 102 mm) | 1.2 mm | 944 mm | 6 | Vinyl, card and thin sheet |
| 4.6 × 6 in (117 × 152 mm) | 1.8 mm | 1,416 mm | 2 | Vinyl, card and thin sheet |
| 6.14 × 8 in (156 × 203 mm) | 2.4 mm | 1,888 mm | 1 | Vinyl, card and thin sheet |
| 9.2 × 12 in (234 × 305 mm) | 3.7 mm | 2,832 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D teacup SVG files
-
Two small 3D teacups for favours Solid · 8 pieces -
3D teacup filled with daisies Solid · 8 pieces -
3D teacup to print and cut by hand Outline · 34 pieces -
3D teacup made up, in five colours Layered · 6 pieces -
3D teacup and saucer Solid · 6 pieces -
3D teacup with a scalloped rim Solid · 6 pieces -
Wide 3D teacup with flower cut-outs Solid · 6 pieces -
3D teacup gift holder for tea bags Solid · 5 pieces
← 3D teacup gift holder for tea bags All 9 3D teacups Two small 3D teacups for favours →