3D teacup to print and cut by hand SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The classic cup and saucer as a drawing: a solid line where you cut, dashes on the long folds and two short bars for the handle slots. Print it 195 mm tall on card, cut it out with scissors, snip between the teeth and cut the slots with a craft knife.
What is in the file
| Size | 98 × 100 mm (3.85 × 3.94 in), scales to any size |
|---|---|
| Pieces | 34 separate pieces |
| Outlines to cut | 40: 34 outer edges and 6 cut-outs |
| Cut length | 1,932 mm at this size |
| Narrowest part | 1.2 mm at this size |
| Nodes | 470 curve and line segments |
Measured from the file. PNG: 1,958 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.98 × 1 in (25 × 25 mm) | 0.3 mm | 491 mm | 100 | Too fine for most machines |
| 1.96 × 2 in (50 × 51 mm) | 0.61 mm | 981 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 2.93 × 3 in (75 × 76 mm) | 0.91 mm | 1,472 mm | 9 | Fine detail: vinyl and paper only, weed with care |
| 3.91 × 4 in (99 × 102 mm) | 1.2 mm | 1,963 mm | 4 | Vinyl, card and thin sheet |
| 5.87 × 6 in (149 × 152 mm) | 1.8 mm | 2,944 mm | 2 | Vinyl, card and thin sheet |
| 7.82 × 8 in (199 × 203 mm) | 2.4 mm | 3,926 mm | 1 | Vinyl, card and thin sheet |
| 11.74 × 12 in (298 × 305 mm) | 3.7 mm | 5,889 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D teacup SVG files
-
3D teacup made up, in five colours Layered · 6 pieces -
3D teacup and saucer Solid · 6 pieces -
3D teacup with a scalloped rim Solid · 6 pieces -
Wide 3D teacup with flower cut-outs Solid · 6 pieces -
3D teacup gift holder for tea bags Solid · 5 pieces -
Stacked pair of 3D teacups Solid · 10 pieces -
Two small 3D teacups for favours Solid · 8 pieces -
3D teacup filled with daisies Solid · 8 pieces
← 3D teacup filled with daisies All 9 3D teacups 3D teacup made up, in five colours →