3D teacup with a scalloped rim SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A taller cup with 16 half rounds along its rim and a saucer with 24 round its edge, whole numbers so that both meet at the seam. Cut 235 mm wide, the cup is 64 mm across the rim, 36 mm across the base and 52 mm tall to the dips, and the saucer is 82 mm across. Loose pieces.
What is in the file
| Size | 100 × 81 mm (3.94 × 3.17 in), scales to any size |
|---|---|
| Pieces | 6 separate pieces |
| Outlines to cut | 34: 6 outer edges and 28 cut-outs |
| Cut length | 996 mm at this size |
| Narrowest part | 1.2 mm at this size |
| Nodes | 396 curve and line segments |
Measured from the file. PNG: 2,000 × 1,625 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.81 in (25 × 20 mm) | 0.3 mm | 253 mm | 120 | Too fine for most machines |
| 2 × 1.61 in (51 × 41 mm) | 0.61 mm | 506 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.42 in (76 × 61 mm) | 0.91 mm | 759 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.22 in (102 × 82 mm) | 1.2 mm | 1,012 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.83 in (152 × 123 mm) | 1.8 mm | 1,518 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.44 in (203 × 164 mm) | 2.4 mm | 2,024 mm | 1 | Vinyl, card and thin sheet |
| 12 × 9.66 in (305 × 245 mm) | 3.7 mm | 3,036 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D teacup SVG files
-
Wide 3D teacup with flower cut-outs Solid · 6 pieces -
3D teacup gift holder for tea bags Solid · 5 pieces -
Stacked pair of 3D teacups Solid · 10 pieces -
Two small 3D teacups for favours Solid · 8 pieces -
3D teacup filled with daisies Solid · 8 pieces -
3D teacup to print and cut by hand Outline · 34 pieces -
3D teacup made up, in five colours Layered · 6 pieces -
3D teacup and saucer Solid · 6 pieces
← 3D teacup and saucer All 9 3D teacups Wide 3D teacup with flower cut-outs →