3D teacup and saucer SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A paper teacup on its saucer, in six pieces: a wall that rolls into the cup, a base disc drawn inside its curl, a handle cut twice, and the saucer’s rim and well. Cut 195 mm tall, the cup is 74 mm across the rim, 40 mm across the base and 46 mm tall. Loose pieces.
What is in the file
| Size | 98 × 100 mm (3.85 × 3.94 in), scales to any size |
|---|---|
| Pieces | 6 separate pieces |
| Outlines to cut | 58: 6 outer edges and 52 cut-outs |
| Cut length | 1,090 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 367 curve and line segments |
Measured from the file. PNG: 1,958 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.98 × 1 in (25 × 25 mm) | 0.51 mm | 277 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 1.96 × 2 in (50 × 51 mm) | 1 mm | 554 mm | 25 | Vinyl, card and thin sheet |
| 2.93 × 3 in (75 × 76 mm) | 1.5 mm | 831 mm | 9 | Vinyl, card and thin sheet |
| 3.91 × 4 in (99 × 102 mm) | 2 mm | 1,107 mm | 4 | Vinyl, card and thin sheet |
| 5.87 × 6 in (149 × 152 mm) | 3 mm | 1,661 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.82 × 8 in (199 × 203 mm) | 4.1 mm | 2,215 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.74 × 12 in (298 × 305 mm) | 6.1 mm | 3,322 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D teacup SVG files
-
3D teacup with a scalloped rim Solid · 6 pieces -
Wide 3D teacup with flower cut-outs Solid · 6 pieces -
3D teacup gift holder for tea bags Solid · 5 pieces -
Stacked pair of 3D teacups Solid · 10 pieces -
Two small 3D teacups for favours Solid · 8 pieces -
3D teacup filled with daisies Solid · 8 pieces -
3D teacup to print and cut by hand Outline · 34 pieces -
3D teacup made up, in five colours Layered · 6 pieces
← 3D teacup made up, in five colours All 9 3D teacups 3D teacup with a scalloped rim →