3D teacup made up, in five colours SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
What the classic pattern makes, seen from a little above and drawn in its own proportions: saucer, cup, handle, two painted bands and the tea. Each layer cuts as flat pieces too, for a card front or a tea party invitation.
What is in the file
| Size | 100 × 64 mm (3.94 × 2.52 in), scales to any size |
|---|---|
| Pieces | 6 separate pieces |
| Outlines to cut | 6 outlines |
| Cut length | 1,008 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 107 curve and line segments |
| Layers | 5: saucer, handle, cup, bands and tea |
Measured from the file. PNG: 2,000 × 1,310 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.64 in (25 × 16 mm) | Over 1.5 mm | 256 mm | 140 | Vinyl, card and thin sheet |
| 2 × 1.28 in (51 × 33 mm) | Over 3 mm | 512 mm | 40 | Any material, including 3 mm wood and acrylic |
| 3 × 1.92 in (76 × 49 mm) | Over 4.6 mm | 768 mm | 15 | Any material, including 3 mm wood and acrylic |
| 4 × 2.56 in (102 × 65 mm) | Over 6.1 mm | 1,024 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 3.85 in (152 × 98 mm) | Over 9.1 mm | 1,536 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 5.13 in (203 × 130 mm) | Over 12 mm | 2,048 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.69 in (305 × 195 mm) | Over 18 mm | 3,072 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D teacup SVG files
-
3D teacup and saucer Solid · 6 pieces -
3D teacup with a scalloped rim Solid · 6 pieces -
Wide 3D teacup with flower cut-outs Solid · 6 pieces -
3D teacup gift holder for tea bags Solid · 5 pieces -
Stacked pair of 3D teacups Solid · 10 pieces -
Two small 3D teacups for favours Solid · 8 pieces -
3D teacup filled with daisies Solid · 8 pieces -
3D teacup to print and cut by hand Outline · 34 pieces
← 3D teacup to print and cut by hand All 9 3D teacups 3D teacup and saucer →