Free wrench SVG

Wrench outline SVG

Wrench outline, drawn as a line — Wrench outline. The preview is the SVG file itself.

The combination wrench as a line drawing: the edge of the open jaw and the handle as one bold line, and the ring end as a heavier loop. For colouring sheets, foil and engraving.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	88 × 100 mm (3.47 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	604 mm at this size
Narrowest part	2.6 mm at this size
Nodes	52 curve and line segments

Measured from the file. PNG: 1,771 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.88 × 1 in (22 × 25 mm)	0.66 mm	153 mm	110	Fine detail: vinyl and paper only, weed with care
1.76 × 2 in (45 × 51 mm)	1.3 mm	307 mm	30	Vinyl, card and thin sheet
2.64 × 3 in (67 × 76 mm)	2 mm	460 mm	12	Vinyl, card and thin sheet
3.52 × 4 in (90 × 102 mm)	2.6 mm	614 mm	6	Vinyl, card and thin sheet
5.29 × 6 in (134 × 152 mm)	4 mm	920 mm	2	Any material, including 3 mm wood and acrylic
7.05 × 8 in (179 × 203 mm)	5.3 mm	1,227 mm	1	Any material, including 3 mm wood and acrylic
10.57 × 12 in (269 × 305 mm)	7.9 mm	1,841 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More wrench SVG files

← Wrench monogram frame All 15 wrenches Layered pipe wrench in three colours →