Free wrench SVG

Two crossed wrenches SVG

Two crossed wrenches, as a solid black shape
Two crossed wrenches. The preview is the SVG file itself.

Two combination wrenches crossed with their open jaws up, one lying over the other. A short gap either side of the front handle shows where they cross.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size85 × 100 mm (3.33 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length905 mm at this size
Narrowest part2.7 mm at this size
Nodes110 curve and line segments

Measured from the file. PNG: 1,702 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.85 × 1 in (21 × 25 mm)0.69 mm230 mm110Fine detail: vinyl and paper only, weed with care
1.69 × 2 in (43 × 51 mm)1.4 mm460 mm30Vinyl, card and thin sheet
2.54 × 3 in (64 × 76 mm)2.1 mm690 mm12Vinyl, card and thin sheet
3.38 × 4 in (86 × 102 mm)2.7 mm919 mm6Vinyl, card and thin sheet
5.07 × 6 in (129 × 152 mm)4.1 mm1,379 mm2Any material, including 3 mm wood and acrylic
6.76 × 8 in (172 × 203 mm)5.5 mm1,839 mm1Any material, including 3 mm wood and acrylic
10.14 × 12 in (258 × 305 mm)8.2 mm2,758 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More wrench SVG files

← Four-way wheel wrench All 15 wrenches Wrench and screwdriver crossed →