Free wrench SVG

Layered pipe wrench in three colours SVG

Layered pipe wrench in three colours, in layered colours — Layered pipe wrench in three colours. The preview is the SVG file itself.

Three layers to stack: a red handle and body, steel grey for the hook jaw and the heel jaw, and a dark adjusting nut. Standing upright, to sit beside a name.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	33 × 100 mm (1.31 × 3.94 in), scales to any size
Pieces	4 separate pieces
Outlines to cut	8: 4 outer edges and 4 cut-outs
Cut length	639 mm at this size
Narrowest part	3.3 mm at this size
Nodes	118 curve and line segments
Layers	3: body, steel and nut

Measured from the file. PNG: 715 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.33 × 1 in (8 × 25 mm)	0.84 mm	162 mm	220	Fine detail: vinyl and paper only, weed with care
0.66 × 2 in (17 × 51 mm)	1.7 mm	325 mm	70	Vinyl, card and thin sheet
1 × 3 in (25 × 76 mm)	2.5 mm	487 mm	30	Vinyl, card and thin sheet
1.33 × 4 in (34 × 102 mm)	3.4 mm	649 mm	14	Any material, including 3 mm wood and acrylic
1.99 × 6 in (51 × 152 mm)	5 mm	974 mm	5	Any material, including 3 mm wood and acrylic
2.66 × 8 in (67 × 203 mm)	6.7 mm	1,298 mm	4	Any material, including 3 mm wood and acrylic
3.98 × 12 in (101 × 305 mm)	10 mm	1,948 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More wrench SVG files

← Wrench outline All 15 wrenches Combination wrench →