Free whale SVG

Humpback whale SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Humpback whale, as a solid black shape
Humpback whale. The preview is the SVG file itself.

A humpback in side view with its long flipper, the small hump of a back fin, an eye, the curved mouth line and two throat grooves. Facing right.

This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.

What is in the file

Size100 × 46 mm (3.94 × 1.82 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length395 mm at this size
Narrowest part1 mm at this size
Nodes132 curve and line segments

Measured from the file. PNG: 2,000 × 967 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.46 in (25 × 12 mm)0.25 mm100 mm180Too fine for most machines
2 × 0.93 in (51 × 24 mm)0.51 mm201 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.39 in (76 × 35 mm)0.76 mm301 mm21Fine detail: vinyl and paper only, weed with care
4 × 1.85 in (102 × 47 mm)1 mm401 mm10Vinyl, card and thin sheet
6 × 2.78 in (152 × 71 mm)1.5 mm602 mm4Vinyl, card and thin sheet
8 × 3.7 in (203 × 94 mm)2 mm803 mm3Vinyl, card and thin sheet
12 × 5.56 in (305 × 141 mm)3 mm1,204 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More whale SVG files

← Baby whale with a heart spout All 14 whales Breaching humpback whale →