Free whale SVG

Leaping orca whale SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Leaping orca whale, as a solid black shape
Leaping orca whale. The preview is the SVG file itself.

The orca arched clear of the water, nose up and flukes down, with its white patches cut out. Lay it over white for the true black and white animal.

What is in the file

Size100 × 90 mm (3.94 × 3.54 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length519 mm at this size
Narrowest part1.2 mm at this size
Nodes146 curve and line segments

Measured from the file. PNG: 2,000 × 1,808 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.9 in (25 × 23 mm)0.3 mm132 mm110Too fine for most machines
2 × 1.8 in (51 × 46 mm)0.61 mm264 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.7 in (76 × 69 mm)0.91 mm395 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.6 in (102 × 91 mm)1.2 mm527 mm6Vinyl, card and thin sheet
6 × 5.4 in (152 × 137 mm)1.8 mm791 mm2Vinyl, card and thin sheet
8 × 7.2 in (203 × 183 mm)2.4 mm1,055 mm1Vinyl, card and thin sheet
12 × 10.8 in (305 × 274 mm)3.7 mm1,582 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More whale SVG files

← Killer whale All 14 whales Sperm whale →