Free whale SVG

Killer whale SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Killer whale, as a solid black shape
Killer whale. The preview is the SVG file itself.

An orca in side view: the tall back fin, a paddle of a flipper, and the white eye patch, chin, flank and saddle cut out so they show the colour beneath.

This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.

What is in the file

Size100 × 60 mm (3.94 × 2.36 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length455 mm at this size
Narrowest part1 mm at this size
Nodes145 curve and line segments

Measured from the file. PNG: 2,000 × 1,231 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.6 in (25 × 15 mm)0.25 mm116 mm150Too fine for most machines
2 × 1.2 in (51 × 30 mm)0.51 mm231 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.8 in (76 × 46 mm)0.76 mm347 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.4 in (102 × 61 mm)1 mm462 mm8Vinyl, card and thin sheet
6 × 3.6 in (152 × 91 mm)1.5 mm693 mm3Vinyl, card and thin sheet
8 × 4.8 in (203 × 122 mm)2 mm925 mm2Vinyl, card and thin sheet
12 × 7.2 in (305 × 183 mm)3 mm1,387 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More whale SVG files

← Breaching humpback whale All 14 whales Leaping orca whale →