Free whale SVG

Sperm whale SVG

Sperm whale, as a solid black shape
Sperm whale. The preview is the SVG file itself.

The square-headed whale of the old whaling prints: a huge blunt head, a thin lower jaw, a low hump and broad flukes. Long and level, for signs and borders.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 33 mm (3.94 × 1.29 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length353 mm at this size
Narrowest part5.4 mm at this size
Nodes101 curve and line segments

Measured from the file. PNG: 2,000 × 706 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.33 in (25 × 8 mm)1.4 mm90 mm230Vinyl, card and thin sheet
2 × 0.65 in (51 × 17 mm)2.7 mm179 mm70Vinyl, card and thin sheet
3 × 0.98 in (76 × 25 mm)4.1 mm269 mm30Any material, including 3 mm wood and acrylic
4 × 1.31 in (102 × 33 mm)5.5 mm359 mm16Any material, including 3 mm wood and acrylic
6 × 1.96 in (152 × 50 mm)8.2 mm538 mm5Any material, including 3 mm wood and acrylic
8 × 2.62 in (203 × 66 mm)11 mm717 mm4Any material, including 3 mm wood and acrylic
12 × 3.92 in (305 × 100 mm)16 mm1,076 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More whale SVG files

← Leaping orca whale All 14 whales Narwhal whale with a twisted tusk →