Heart vine SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A vine grown into the shape of a heart, with leaves along the outside and two curls where the ends meet at the top. Open in the middle for names or a date.
What is in the file
| Size | 100 × 80 mm (3.94 × 3.14 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 16: 1 outer edge and 15 cut-outs |
| Cut length | 992 mm at this size |
| Narrowest part | 1.1 mm at this size |
| Nodes | 294 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,610 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.8 in (25 × 20 mm) | 0.28 mm | 252 mm | 120 | Too fine for most machines |
| 2 × 1.59 in (51 × 40 mm) | 0.56 mm | 504 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.39 in (76 × 61 mm) | 0.84 mm | 756 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.19 in (102 × 81 mm) | 1.1 mm | 1,008 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.78 in (152 × 121 mm) | 1.7 mm | 1,512 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.38 in (203 × 162 mm) | 2.2 mm | 2,016 mm | 1 | Vinyl, card and thin sheet |
| 12 × 9.56 in (305 × 243 mm) | 3.4 mm | 3,024 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.