Free vine SVG

Vine swag with flowers SVG

Vine swag with flowers, as a solid black shape — Vine swag with flowers. The preview is the SVG file itself.

A garland that hangs in a curve between two loops, with three flowers, the largest at the lowest point, and pairs of leaves between them. Exactly symmetrical, to hang over a name or a doorway.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 48 mm (3.94 × 1.87 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	25: 1 outer edge and 24 cut-outs
Cut length	642 mm at this size
Narrowest part	1.8 mm at this size
Nodes	209 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 992 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.48 in (25 × 12 mm)	0.46 mm	163 mm	180	Too fine for most machines
2 × 0.95 in (51 × 24 mm)	0.91 mm	326 mm	50	Fine detail: vinyl and paper only, weed with care
3 × 1.43 in (76 × 36 mm)	1.4 mm	489 mm	21	Vinyl, card and thin sheet
4 × 1.9 in (102 × 48 mm)	1.8 mm	652 mm	10	Vinyl, card and thin sheet
6 × 2.86 in (152 × 73 mm)	2.7 mm	978 mm	3	Vinyl, card and thin sheet
8 × 3.81 in (203 × 97 mm)	3.7 mm	1,305 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.71 in (305 × 145 mm)	5.5 mm	1,957 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More vine SVG files

← Flower vine circle All 15 vines Vine monogram frame →