Free vine SVG

Flower vine SVG

Flower vine, as a solid black shape — Flower vine. The preview is the SVG file itself.

A waving vine that carries four small five-petalled flowers on side stalks, with a leaf opposite each and a bud at the tip. For spring cards, nursery walls and cake toppers.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 47 mm (3.94 × 1.87 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	12: 1 outer edge and 11 cut-outs
Cut length	801 mm at this size
Narrowest part	1.8 mm at this size
Nodes	250 curve and line segments

Measured from the file. PNG: 2,000 × 988 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.47 in (25 × 12 mm)	0.46 mm	203 mm	180	Too fine for most machines
2 × 0.95 in (51 × 24 mm)	0.91 mm	407 mm	50	Fine detail: vinyl and paper only, weed with care
3 × 1.42 in (76 × 36 mm)	1.4 mm	610 mm	21	Vinyl, card and thin sheet
4 × 1.9 in (102 × 48 mm)	1.8 mm	814 mm	10	Vinyl, card and thin sheet
6 × 2.84 in (152 × 72 mm)	2.7 mm	1,221 mm	4	Vinyl, card and thin sheet
8 × 3.79 in (203 × 96 mm)	3.7 mm	1,628 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.69 in (305 × 144 mm)	5.5 mm	2,441 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More vine SVG files

← Heart vine All 15 vines Corner vine →