Free vase SVG

Bud vase with one daisy SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Bud vase with one daisy, as a solid black shape
Bud vase with one daisy. The preview is the SVG file itself.

A small round bud vase holding a single tall daisy with two leaves on a gently bent stem. A slim design for the edge of a card, a bookmark or a place setting.

What is in the file

Size37 × 100 mm (1.46 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length415 mm at this size
Narrowest part2 mm at this size
Nodes91 curve and line segments

Measured from the file. PNG: 788 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.37 × 1 in (9 × 25 mm)0.51 mm105 mm210Fine detail: vinyl and paper only, weed with care
0.74 × 2 in (19 × 51 mm)1 mm211 mm60Vinyl, card and thin sheet
1.11 × 3 in (28 × 76 mm)1.5 mm316 mm27Vinyl, card and thin sheet
1.48 × 4 in (38 × 102 mm)2 mm422 mm14Vinyl, card and thin sheet
2.22 × 6 in (56 × 152 mm)3 mm632 mm5Any material, including 3 mm wood and acrylic
2.96 × 8 in (75 × 203 mm)4.1 mm843 mm3Any material, including 3 mm wood and acrylic
4.44 × 12 in (113 × 305 mm)6.1 mm1,265 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More vase SVG files

← Greek amphora vase All 13 vases Three vases on a shelf →