Free vase SVG

Flower pot with daisies SVG

Flower pot with daisies, as a solid black shape
Flower pot with daisies. The preview is the SVG file itself.

A terracotta flower pot on a saucer, planted with three daisies on stout stems and four leaves. One line is cut round the pot under its rim.

Free for personal and commercial use, no sign-up. What you can do with it.

This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.

What is in the file

Size67 × 100 mm (2.62 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length785 mm at this size
Narrowest part3.4 mm at this size
Nodes145 curve and line segments

Measured from the file. PNG: 1,358 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.67 × 1 in (17 × 25 mm)0.86 mm199 mm140Fine detail: vinyl and paper only, weed with care
1.33 × 2 in (34 × 51 mm)1.7 mm399 mm35Vinyl, card and thin sheet
2 × 3 in (51 × 76 mm)2.6 mm598 mm15Vinyl, card and thin sheet
2.66 × 4 in (68 × 102 mm)3.5 mm798 mm8Any material, including 3 mm wood and acrylic
4 × 6 in (101 × 152 mm)5.2 mm1,196 mm2Any material, including 3 mm wood and acrylic
5.33 × 8 in (135 × 203 mm)6.9 mm1,595 mm2Any material, including 3 mm wood and acrylic
7.99 × 12 in (203 × 305 mm)10 mm2,393 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More vase SVG files

← Three vases on a shelf All 13 vases Empty flower pot on a saucer →