Free vase SVG

Empty flower pot on a saucer SVG

Empty flower pot on a saucer, as a solid black shape
Empty flower pot on a saucer. The preview is the SVG file itself.

A plain flower pot with a thick rim, standing empty on its saucer, with one line under the rim and a drainage slot above the foot. The same on both sides, and ready for a plant of your own.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 82 mm (3.94 × 3.22 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length560 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes52 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,650 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.82 in (25 × 21 mm)Over 1.5 mm142 mm110Vinyl, card and thin sheet
2 × 1.64 in (51 × 42 mm)Over 3 mm284 mm30Any material, including 3 mm wood and acrylic
3 × 2.45 in (76 × 62 mm)Over 4.6 mm427 mm12Any material, including 3 mm wood and acrylic
4 × 3.27 in (102 × 83 mm)Over 6.1 mm569 mm6Any material, including 3 mm wood and acrylic
6 × 4.91 in (152 × 125 mm)Over 9.1 mm853 mm2Any material, including 3 mm wood and acrylic
8 × 6.54 in (203 × 166 mm)Over 12 mm1,138 mm1Any material, including 3 mm wood and acrylic
12 × 9.82 in (305 × 249 mm)Over 18 mm1,707 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More vase SVG files

← Flower pot with daisies All 13 vases Vase with a heart →