Free Vacay Mode SVG

Vacay Mode in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Vacay Mode in Lilita One, as a solid black shape
Vacay Mode in Lilita One. The preview is the SVG file itself.

“Vacay Mode” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 69 mm (3.94 × 2.72 in), scales to any size
Pieces9 separate pieces
Outlines to cut14: 9 outer edges and 5 cut-outs
Cut length920 mm at this size
Narrowest part4 mm at this size
Nodes200 curve and line segments

Measured from the file. PNG: 2,000 × 1,408 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.69 in (25 × 18 mm)1 mm234 mm130Vinyl, card and thin sheet
2 × 1.38 in (51 × 35 mm)2 mm467 mm35Vinyl, card and thin sheet
3 × 2.08 in (76 × 53 mm)3 mm701 mm15Any material, including 3 mm wood and acrylic
4 × 2.77 in (102 × 70 mm)4.1 mm935 mm8Any material, including 3 mm wood and acrylic
6 × 4.15 in (152 × 105 mm)6.1 mm1,402 mm2Any material, including 3 mm wood and acrylic
8 × 5.54 in (203 × 141 mm)8.1 mm1,869 mm2Any material, including 3 mm wood and acrylic
12 × 8.3 in (305 × 211 mm)12 mm2,804 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Vacay Mode SVG files

← Vacay Mode in Kaushan Script All 13 Vacay Mode designs Vacay Mode in Alfa Slab One →